This is the original metric version of the plan (millimetres/centimetres). See also Chicken coop plans: Imperial (feet/inches).
This chicken coop can be moved around your lawn to give your hens fresh grass and stop them doing permanent damage by eating and scratching up one spot too much. This is a compact design, ideal for urban backyards. The way the enclosed house is elevated of the ground creates extra room in the cage and will help deter pests from entering the house.
This sort of design is sometimes called a chicken tractor, because of the way it can be moved around. Many people don't have the space for free-range hens. Keeping them in an enclosure like this means they are still able to eat grass, shoots, bugs and other "wild" foods. They will also be able to scratch around on fresh ground every time you move the cage.
Use our list of materials to get organised before you start, as this will help you avoid lots of trips to the hardware store.
Tip: When ordering timber, get the longest lengths possible. For example, getting two 5m lengths will result in less wastage (because of off cuts) than getting five 2m lengths. Of course it often depends on what you can fit on your car or trailer.
You can do most of the work for this coop with just a hand saw and a hammer, but to make things easier you should have these tools at hand:
Note: The suggested quantities of timber and plywood allow 5% for wastage and off cuts.
*Dressed timber will be about 5mm smaller than stated dimensions. For example, the 50mm by 25mm timber is usually 45mm by 20mm when dressed. If you use rough sawn timber, small adjustments to some measurements will be needed.