Rabbit hutch plans

The frame - stage two

This is the original metric version of the plan (millimetres/centimetres). See also Rabbit hutch plans : Imperial (feet/inches).

Now you need to get out your 50mm by 25mm timber. The frame in Figure 3.1 is designed to be covered with wire netting. We suggest you make the square section first then check the measurements for the two sloped supports.

Differences in the thickness of timber and small mistakes earlier in the project can add up. So from this point on you should double check our measurements on your actual project before cutting.

The 350mm length should be placed 510mm from the support nearest the main house. This will create a space 510mm by 350mm which will become a doorway later.